Tag Archives: habitable worlds

Chapter 3: Climatic Factors

Attempting to determine the basic climatic conditions for our model planets, we will take into account several major variables. We will attempt to treat some of these variables in order to develop an insight into general planetary climatology. You should keep in mind that the approach taken in the survey is a combination of intuition and empiricism and that even current attempts to calculate mean annual temperatures for Earth (mid to late 1960s) have not been highly successful.

Axial Inclination
Axial inclination refers to the number of degrees which a planet’s equator is tilted from its orbital plane.

Since all of the planets in our Solar System display axial inclination, we may theorize that whatever the process leading to its development here, perhaps exists universally. However, since the process isn’t understood, we’ll consider various degrees of axial inclination to develop an understanding of their general effect on a planet’s surface temperature.

Axial inclination, near 0º
On a planet with 0º or near 0º axial inclination, the temperature, precipitation rate and length of day would not vary appreciably in any one spot throughout the year, assuming a nearly circular orbit. circular.Because the planet has no tilt, there  would be no seasonal change as the year progresses. At any point on the planet’s surface, the  prevailing conditions in January would be the same as  in July. Low latitudes, near the equator, would experience the planets perpetual summer temperatures. High latitudes, nearer the poles would exist in a relative condition of winter with low illumination. On either side of the equatorial summer zone, there would exist temperatures we may classify as relatively spring like. The next zone would be fall like, with temperatures declining as one approached the high latitude winter zone.

Proceeding from the equator toward either pole, you would almost imperceptibly move across the planet’s surface temperature gradients, from relatively hot, to relatively cold.

Many plant species on Earth require a certain number of days with frost, a particular number of hours sunlight or some other abiotic factor to trigger seasonal growth. On worlds with 0º or very low axial inclination, plant life would have made other adaptations to the essentially non varying climate at their latitude. We might expect more sensitive biological triggers and a greater number of species which were perennials and fewer annuals.

Axial inclination approaching 90º
Worlds with axial inclinations approaching 90º would experience some really exciting seasonal climatic variation.

As the planet orbited its parent star, it would alternately have one of its poles bathed in summer sunlight for a quarter year, have a quarter in semi dark winter. Between the long hot polar summer cold winter cycles, the lower latitudes would gradually shift into a regular day and night cycle. The day and night cycle on this model would be complex, with the polar regions growing tropically warm in their seasonal summer and declining to Arctic cold in their seasonal winter.

Note from the preceding diagram that , the planets south polar region is experiencing summer. A few months later having orbited to position B, the polar regions are now located at a point approximately 90º from the sun, therefore are experiencing conditions similar to those at Earth’s poles. Note also that in position A, the “spring and fall” moderate temperature zones on the illuminated side of the hemisphere do not experience night. In these locations, the sun would simply circle in the sky. But it would not set As the planet orbits to position B, the spring  and fall temperature zones acquire a day and night cycle.

To a person standing on the illuminated hemisphere in planetary position A, the sun would appear to circle in the sky, but as the weeks passed, the apparent circle would spiral closer to the horizon. At some point midway between points A and B, the sun would dip below the horizon for a period of sunset, then it rise again. Approaching position B, the sun would set and nights would become longer. At position B, the sun would rise on one side of the horizon and set on the other, visually similar to what we experience.

As the planet orbited toward position C, the sun would  be seen to rise lower and lower in the sky, the days would shorten and temperatures. At position C, an observer at the south pole would be in several months of cold darkness. Southern latitudes would be in s state of extended twilight. Northern latitudes would be basking under extended periods of continuous daylight. At the same time, the north polar region would be baking in a summer season under overhead tropical sunlight.

Note that between location A and C, the poles experiencing summer and winter have reversed.

If this planet had an APST of 68ºF (20ºC) then a large percentage of the planet’s surface would experience a temperature range from between 81ºF to -25ºF. I would more or less expect tundra type terrain and vegetation on either side of the equator and vegetation specialized for hot and cold temperatures in higher latitudes.

Should such a planet exist in the ecosphere of a F class star, it would have a long year and therefore longer seasons for growth, before dormancy. Migration might play a major influence amongst larger life forms. If the planet orbited a relatively small cool class K star the year would be short and the growing season reduced.

Intermediate axial inclinations
Climatic factors arising on planets with intermediate axial inclination would vary according to the level of inclination. Planets with axial inclinations of 10º-15º will have milder seasonal temperature variations than planets with larger inclinations.

Those of us living in the mid latitudes on Earth (my 1980-2005 home is roughly on 45º33’ north latitude) can attest to the seasonal climatological effects of Earths 23½º axial inclination.

A mid latitude location on a planet with an APST of 20ºC and a 40º-60º axial inclination would be subjected to a steamy tropical summer and a frigid Arctic winter. On small to mid size planets with moderate inclinations, plant life would have developed highly protective tissues against the relative cold and heat. Desiccation and starvation  would be major biological problems.

Warm vs. Cold-bloodedness
Axial inclination and APST are two very important variables in broadly determining whether intelligent life on our model planets are warm or cold-blooded.

Basically, the difference between being ‘cold blooded’ or ‘warm blooded’ is that the former life forms are dependant on external temperatures while the latter have developed mechanisms to maintain internal temperatures under a wide range of external temperatures.

Persistent wide variability, periodic extreme oscillations and ‘cold’ or ‘hot’ are conditions conductive to the development of warm ‘bloodedness’. On the contrary, mild and seasonal temperature changes in a warm climate (not hot) are favorable to cold ‘bloodedness’.

It takes more biological equipment to be warm-blooded than cold-blooded; however, the extra activity gained in a hostile environment, apparently make the investment worthwhile.

I’ve worked out the following graphic to demonstrate the gross conditions where I believe we might find the development either cold or warm-blooded life forms.

In the upper portion of the graph, hot temperatures tend to be a limiting factor for cold-blooded dominant life forms. Low and to the left, it is general cold that limits cold-blooded expansion and-or probabilities. Looking up and to the right, we see that warm ‘bloodedness’ is favored as the  planets axial inclination rises, since this increases the summer high and drops the winter low temperature average for each latitude.

Although warm-blooded dominant life forms could exist on all the planetary models represented in the graph, cold blooded dominant life would probably be found on planets whose general climatic scheme was delineated by the green hashed area.

Planetary energy balance
In order to determine evaporation rates, we need to start with the total available solar radiation, make the necessary subtraction for albedo, etc. and thereby find the planets working energy balance.

We’ll start at the top of the planet’s atmosphere with the solar constant, a ‘constant’ because it varies little over a long period of time.

Coming down through the atmosphere, the first quantity of energy we subtract from the solar constant is the albedo, this amount is reflected back into space by atmospheric reflection (from the cloud cover). The remaining energy  is almost entirely used to heat the planet’s surface and to circulate the atmosphere.

Since atmospheric surface pressure is related to atmospheric density, the ratio between percent energy absorbed by our atmosphere and the surface pressure were used to determine the percent energy absorbed by the atmospheres of our model planets.

In the following table, the percent energy absorbed from the incoming radiation by the atmosphere is shown related to the corresponding planets mass.

Mass of planet ,  Ê = 1 0.25 .50 1.0 1.5 2.0 3.0
Percent energy absorbed 7 12 17 20 22 25

Having  reduced the solar constant by subtracting out the albedo and the energy absorbed by the atmosphere, what we have left is the radiant energy actually reaching the planet’s surface. Of this energy, some is lost as long wave radiation and some is reflected. When water or ground moisture is available, nearly all the remaining energy is used in evaporation.

Computing precipitation and evaporation
It’s been calculated that the average evaporation and precipitation rate for Earth is 100 cm (40 inches) per year. However, this is merely an average, because there is a sizeable difference in this rate over land and sea. The oceans have a precipitation rate close to 111 cm. (44 inches) and an evaporation rate of 120 cm (48 in), with the difference being returned to the oceans by river flow.

On land, the average precipitation rate is 71 cm (28 inches) per year with about 24 cm (10 inches) lost by river discharge.

The average evaporation rate for land is misleading because it takes into account a large portion of the land surface which contributes little to the figure, for example, tundra, icecaps, deserts and mountains. When these areas are taken into account, we find that the balance of the land receives about 100 cm (40 in) per year, the global average.

On a global scale, total evaporation equals total precipitation, or “what goes up must come down”. The following equation may be used to calculate precipitation or evaporation rates for our model planets:

Average annual Planetary Precipitation (cm) = [(1-(A+a)) *(0.29d)* (0.4E((/R3*8760)/Z)]/H

Conversions: The precipitation rate in cm/2.5 = the precipitation rate in inches.

Factors used in the Precipitation computation See the required data in Table: Data for computing precipitation and evaporation rates, below.

A   = Percent energy absorbed by the planet’s atmosphere.
a   = Percent albedo loss, See below, Table: Data for computing precipitation and evaporation rates.
d   = Planetary rate of rotation in minutes.
E   = See Determining Solar Constants (read in cal/cm² min), Chapter 2.
R   = See Orbital Radius, See Chapter 2.
H   = Latent Heat of vaporization.
Z   = See Planetary Rate of Rotation (in hours).

The following Table: Data for Computing Precipitation and Evaporation Rates, provides the data required to calculate average precipitation and evaporation for the model planets:

Table : Data for computing precipitation and evaporation rates

M Mass  w = 1 0.25 0.50 1.0 1.5 2.0 3.0    
A1 % Energy absorbed by the Planets Atmosphere 0.07 0.12 0.17 0.20 0.22 0.25 0.31 0.34
A2 % Albedo loss 0ºC 0.20 0.22 0.30 0.36 0.42 0.54    
15ºC 0.22 0.26 0.33 0.39 0.45 0.57    
30ºC 0.26 0.30 0.36 0.42 0.48 0.61    
45ºC 0.30 0.33 0.38 0.46 .052 0.61 = x  
60ºC 0.33 0.36 0.42 0.49 0.59 0.61   = x
D Rate of Rotation (minutes) 1380 1200 1020 900 870 780    
Z Rate of Rotation (hours) 23 20 17 15 14.5 13    
E Solar Constant(cal/cm² min) 0ºC 1.34 1.4 1.58 1.7 1.88 2.36    
15ºC 1.58 1.62 1.82 2.0 2.22 2.4    
30ºC 1.8 1.9 2.08 2.3 2.6 2.8    
45ºC 2.06 2.16 2.38 2.72 3.0 3.3    
60ºC 2.34 2.48 2.7 3.08 3.48 3.92    
H Latent Heat of Vaporization of Water (cal/gm) 0ºC 595    
15ºC 588    
30ºC 580    
45ºC 571    
60ºC 563    

Left column labels M, A, A2, etc. are computer variable names used in the following computer program.

x = Seen at right in the table show the percent energy absorbed at 100% cloud cover, the last two 61% albedo loss only.

Using data from, Table: Data for Computing Precipitation and Evaporation Rates, you may compute the average precipitation and evaporation rates with the following B.A.S.I.C. language program.

Line Number Northstar B.A.S.I.C.
10 REM   CALCULATE INCHES PRECIPITATION FOR PLANETS
20 !CHRS$(11)
30 INPUT   “Mass of planet ?”, M
40 INPUT   “APST ?”, W
50 INPUT   “% Energy absorbed by atmosphere ?”, A1
60 INPUT   “% albedo loss ?”, A2
70 INPUT   “Rate of Rotation  (in minutes) ?”, D
80 INPUT   “Planets Solar Constant ?”, E
90 INPUT   “Rate of rotation (in hours) ?”, Z
100 INPUT   “Latent Heat of Vaporization (water) ?”, H
110 REM   L=SPECTORAL CLASS-G0-STAR LUMINOSITY
120 L=1.04
130 REM   CALCULATE ORBITAL RADIUS RELATIVE TO EARTH
140 E1=E/1.97
150 R1+L/E1
160 R2=SQRT(R1)
170 R3=R2*R2*R2
180 REM   R4=RELATIVE SIDEREAL PERIOD
190 R4=SQRT(R3)
200 REM   PRECIPITATION EQUATION IN CENTIMETERS PPT.
210 P1=[1-(A1+A2)]*(0.29*D)*[0.4*E(R4*8760/Z)]/H
220 REM   CONVERT CENTIMETERS PPT TO INCHES PPT
230 P2=P1/2.5
240 !   ”MASS PLANET”, M
250 !   “APST”, W
260 !   “INCHES PPT”, P2
270 INPUT   “Do calculations again ? Y or N”, Q$
280 IF   Q$=”Y” THEN 20, ELSE 290
290 END

If you multiply the planet’s average precipitation or evaporation rate by the cosine of the planet’s latitude you’ll be able to roughly determine the precipitation or evaporation for the chosen latitude.

Table: Cosine of planetary latitudes

Latitude 10º 20º 30º 40º 50º 60º 70º 80º 90º
Cosine 1.0 0.984 0.939 0.866 0.766 0.642 0.500 0.342 0.173 0

The preceding method of determining precipitation rates over the planet’s surface will be modified in the next chapter.

Continued in Chapter 4: Atmospheric Circulation

Leave a comment

Filed under SRAPO (Stellar Radii and Planetary Orbits), __Chapter 3: Climatic Factors

Chapter 2: Average Planetary Surface Temperature (APST)

The Average Planetary Surface Temperature (APST) range used in this study was taken in part from the wide limits found amongst life forms on Earth. The range is 0ºC to 60ºC for the vast majority of the Plant and Animal Kingdom. Below the freezing point of water, 0º C, as ice,  water is no longer a dispersion medium for chemical activity, and above 60°C, protein coagulates.

It should be realized that on Earth, a few organisms that have adapted to extreme temperatures that are much higher or lower than the average. These organisms already had a several billion year evolutionary history of thriving in more normal temperature environments, before slowly adapting to these more extreme, hostile conditions.

Temperature Discussion
Temperature means “intensity of heat” and the average amount of heat in a body is the average kinetic energy of the molecules of which that body is composed.

In the plant kingdom, temperature and precipitation are the  major climatic factors determining a species range. Temperature influence the plant activities of water absorption, transpiration, germination, growth, photosynthesis and reproduction.

The effects of high temperature on plants are: desiccation and basically, starvation, since the rate of respiration becomes so high that food consumption exceeds production by photosynthesis.

As temperatures rise, the rate of chemical reactions increase, so that with each, approximately 10ºC increase in temperature, there is a 100% rise in the rate of chemical reaction. This occurs because the increase in temperature causes greater molecular activity and more molecules reach the energy plateau necessary for their specific reaction.

Enzyme catalyzed reactions increase in rate until about 50ºC, above this the enzymes are rapidly inactivated and destroyed by heat denaturalization. Protein extracted from living tissue coagulates around 60ºC, but some thermophilic bacteria have adapted to temperatures as high as 75ºC.

Most of our food crops require a temperature between 10ºC and 30ºC during their growing season. Where as the overall majority of plants cease functioning below 0ºC, many are capable of short-term survival at exposures down to -50ºC to -62ºC. At low temperatures (approaching 0ºC) plants cease to  be metabolically active, because internal temperatures are similar to external temperatures; the result being a greatly reduced enzyme activity and the freezing of water.

As can be seen, temperature plays a strong role in the biology’s of Earth. The same basic chemical building blocks, ie, carbon, nitrogen, water, sulfur, lead, iron, etc, exist on planets beyond our solar system. Alien life forms will be circulating the elements from the natural environment through their bodies in a way not necessarily identical to us, but in similar ways for their own nutritive needs.

Because plants cease to function below 0ºC, this will be the lower Average Planetary Surface Temperature (APST) used in this study, because protein coagulates at or around 60ºC, this will be the high APST used in this study.

Table: Intuitive Comparisons of Planetary Surface Temperatures

0°C 32°F Average surface temp on Mars -67°F with an overall range of -207°F to 80°F. The annual mean temperature at the North Pole is -40°F in winter and 32°F in summer.
15°C 59°F 59°F is Earth’s average temperature.  Los Angeles averages 66°F, with a seasonal low of about 45°F to highs around 90°F.
30°C 86°F HUMID: Manila,   Philippines – mean annual relative humidity 73.8%, (82% RH during rainy season, about the maximum moisture that the atmosphere can hold, with an average temperature of 82°F;  88°F to  93°F daytime high temperatures are common.
Bangkok, Thailand – mean annual RH 80%, with an average temperature of 82°F; 88°F to 92°F daytime highs common. These places experience extreme humidity during their rainy seasons combined with warmth giving the feel of a lukewarm sauna.  [Wet planet with 30°C ASPT-think ‘lukewarm sauna’]
30°C 86°F DRY: The average annual temperature for the Sahara desert is 86°F (30°C) with an   average humidity of 25%. Hot dry air and soil.
Dallol, Ethiopia, is the warmest   place on earth with an average yearly ambient surface air temperature   of 34°C = 93°F.  [Dry planet with 30°C ASPT-think, ‘typical hot, arid desert’]
45°C 113°F In July the Sahara desert reaches temperatures of 113°F to 122°F degrees; with the sand reaching 170°F, and rocks 100-110°F. [Dry planet: Think, ‘extreme desert conditions’. Wet planet: Think, ‘extremely dangerous heat and humidity’].
60°C 140°F Earth record   temperatures: Lut Desert of   Iran, 159°F (2005), El Azizia, Libya, 136°F (1922); Death Valley, California, 34°F (1913).

Formula for converting from °C to °F:
(°C x 9/5) + 32 = °F

Percentage Cloud Cover
Having chosen the APST limits for our model planets, it is necessary to determine what environmental conditions would create such temperatures. The first problem I encountered was the need to have a correlation between APST, planetary mass and cloud cover. I intuitively derived the multi axis graph entitled, Cloud Cover Determination, seen below.

Cloud Cover Determination Diagram

Read the Cloud Cover Determination Diagram, proceed as follows: 1) Choose a planetary mass from the bottom axis and an APST from the left axis, 2) Read up from the selected mass to intersect with the selected APST. 3) At the mass-APST intersection read to the upper right to the associated Percent Cloud Cover scale. Example: A planetary mass of 0.5 (Ê = 1) and APST of 15ºC would be found with approximately a 30% cloud cover.

The Cloud Cover Determination chart is important, because ‘cloud cover’ is a factor in the determination of the amount of sunlight that reaches  the planet’s surface and how much is reflected by clouds, back into space.

 In order to make the Cloud Cover Determination Diagram, I compared the APST, cloud cover and mass of Venus and Mars with Earth. It became apparent that average planetary cloud cover is correlated with two major parameters: planetary mass and APST. In the case of Venus, a planet with nearly the mass of Earth, but with a much higher APST, the cloud cover grew to 100% transforming it from optically thin to optically dense. The dense cloud cover further increased the APST through the greenhouse effect, which in turn vaporized yet more material and created a still denser atmosphere.

By considering the crystallization of albite as an example of the process leading to the formation of water, and saying that an equal percentage of the mineral composing each planet’s crustal material, then the amount of water released from the crust of the largest planet would be about twelve times greater than the water released from the crust of the smallest planet. Note that the planetary mass range in this study extends from 0.25 to 3.0 Earth masses.

Since the surface area of the largest planet is only three times as great as the smallest, yet carries twelve times more water. It is clear that the surface of the largest planet is nearly covered with water, while the smallest planet is covered primarily by dry land.

As the size of the planet increases from 0.25 to 3.0 Earth masses, the percentage of the  planet’s surface covered by water increases. At any given average planetary surface temperature, between 0ºC and 60ºC, there would be more total evaporation occurring from the surface of a large planet than from the surface of a small planet. See diagram below.

Comparing Several Features of Large and Small Habitable Planets
For the purpose of this study, and to gain a relative insight into planet’s ecology under varying conditions, I have with some thought, assigned each of the following planetary models with a reasonable percentage surface exposed to land and water.

Land Mass vs. Water Ratio table

Planetary   Mass, Ê = 1 0.25 0.50 1.0 1.5 2.0 3.0
Percent Land 95 60 30 22 15 5
Percent   Water 5 40 70 78 85 95

The  ratios given in the previous table would be variable, since on cold planets, water would be frozen out to form thick expansive polar icecaps; while on relatively warmer planets, there would be little or no ice, hence less surface area in dry land.  [Note: Mars has a mass of 0.1 Earth, only 40% the size of the smallest planet used in this study, and would therefore expected to have very little surface water. Being further from the Sun, most of the water that has not evaporated from the planet’s atmosphere would be found frozen in polar sheets; leaving a very large dry land to (frozen) water surface ratio – as we’ve found.]

On a large planet, the atmosphere is quite dense near the surface, but loses density rapidly with elevation. On small planets, the atmosphere is less dense near the surface and trails of more gradually with increased elevation.

These factors affect the percentage cloud cover in such a way that when comparing a larger and smaller planet of similar average planetary surface temperature; the larger planet would have a larger, thicker cloud cover, while the smaller planet would have a smaller, thinner cloud cover.

On any of our planetary models, the warmer the APST, the greater the percentage cloud cover. Naturally, the warmer it is, the greater the evaporation, the more moisture the air can carry and the greater the cloud cover.

Planetary Parameters Table

Planetary Mass, Ê = 1 0.25 0.5 1.0 1.5 2.0 3.0
Planetary Mass, Nx10^27 grams 1.49 2.98 5.97 8.96 11.93 17.9
Surface Gravity, Ê = 1 0.52 0.69 1.0 1.23 1.36 1.69
Surface Area, Ê = 1 0.46 0.68 1.0 1.2 1.42 1.70
Surface Area, Nx10^8 mi. 0.93 1.41 2.02 2.41 2.86 3.43
Circumference, Ê = 1 0.67 0.83 1.0 1.1 1.2 1.3
Radius in miles 2730 3360 4020 4400 4780 5240
Planetary Density, Ê = 1 0.79 0.85 1.0 1.13 1.17 1.28
Escape Velocity, Ê = 1 0.60 0.76 1.0 1.16 1.28 1.5
Escape Velocity, km/sec 6.7 8.6 11.2 13.0 14.4 16.8
Mass of Atmosphere, Ê = 1 0.19 0.43 1.0 1.43 1.87 2.55
Mass of Atmosphere, Nx10^21 grams 1.0 2.4 5.3 7.6 9.9 13.5
Surface Pressure (lbs/²) 6.2 9.5 14.7 17.2 19.0 21.7
Rate of Rotation (hours) 23.2 20.2 17.0 15.3 14.4 12.8
Incoming energy absorbed by the Atmosphere., Ê = 1 0.79 0.85 1.0 1.13 1.17 1.28
General Planetary description. Small Dry Small Damp Medium Wet Medium Wet Large Liquid Large Aquatic

.

Incoming radiation
The next step in determining the factors which affect average planetary surface temperature was to create a graphic in which there was an alignment between APST and radiant  energy heating the planet’s surface at the equator; this criteria was further correlated with the planetary cloud cover. (From the Determining Incoming Radiation Diagram above).

After computing (with a slide rule) the surface values for Earth and Mars and positioning them in the chart’s grid at their known APST, percent cloud cover and mass, the graph then provided a scale from which to determine the equatorial surface radiation energy levels for our planetary models.

 Having derived the amount of radiant energy striking a planet’s surface at the equator, thereby deducing its APST, it was necessary to track the sunlight back up through the atmosphere, add-on the albedo losses and end up with the solar constant (amount of ‘sunlight’) at the top of the atmosphere.
Definitions:
•  Solar constant: The amount of sunlight per square centimeter at the top of the planet’s atmosphere above the equator; the solar constant for Earth is 1.97 gm cal/cm² min.
•  Albedo: The amount of sunlight reflected back into space from the clouds, snow, sand, etc. The    albedo is expressed as a fraction of the total sunlight falling on the top of the planet’s atmosphere; on Earth, the albedo has a value of 0.36.

These relationships may be expressed as follows:

Radiant energy heating the planets surface at the equator = Solar constant – (albedo x solar constant)
1.28 gm cal/ cm² minute Ê =  2gm cal/cm² minute – (0.36 x  2 gm cal/ cm² minute)

In order to determine a table for the range of albedos used in our planetary models, I graphed the Martian cloud cover and albedo against those of Venus. See Determining Incoming Radiation diagram above.  Note that Earth has about a 47% cloud cover, which on the diagram, yields a 0.34 albedo. Since atmospheric scientists  have determined Earth’s albedo is 0.36, I felt my albedo Determination graph was well within the acceptable range of error that could be associated with a study of this nature.

NOTE: You do not need to do the following calculations to work with the SRAPO templates. The data: Solar Constant, % Energy absorbed by the Planets Atmosphere, % Albedo loss, Rate of (planetary) rotation and Latent Heat of Vaporization of Water are presented in Chapter 3: Climatic Factors, Table: Data for computing precipitation and evaporation rates.

Determining Solar Constants
The next step resulted in the graph Determining Solar Constant. This is the tool to use when trying to determine the solar constant of a planetary model. See the following page. With it,  you can choose a planetary mass and APST then derive the resulting percentage cloud cover and the solar constant. If for example, you choose a 0.25 mass planet with a 30ºC APST, find the intersect within the body of the graph. Now, read horizontally across to the left Y axis scale for a 32% cloud cover and down to the lower X axis scale for a 1.80 gm cal/ cm² min solar constant.

Orbital Radius
At this point, we have the ability to begin with a set of basic planetary conditions , planetary mass and APST, and derive a specific solar constant.

The next question was, “How far is the planet from its parent star?” To answer this, you must first choose a Main Sequence star by its spectral classification,  thereby selecting its luminosity relative to the Sun. See Stellar Parameters, page 37.

With the following equation, you can calculate a habitable planets orbital radius about the given spectral class of star.

Radius of the planet’s orbit = The stars Luminosity (where Š =1) / the planets Solar Constant (where Ê = 1)
R2 =  L/S

At this point, we’ll stop and review the pieces of information we have deduced about our planetary models.

In the chart above: Cloud Cover is in the left axis. The amount of ‘sunlight’ hitting the top of the planet’s atmosphere is along the bottom axis. Each diagonal line inside the chart represents a planet of given mass (0.25 to 3.0 Earth masses) each is shown with a sliding scale of average planetary surface temperature – which correspond to the planet’s cloud cover and how much sunlight arrives from its parent star (Sun).  Example: A planet of 0.25 Earth masses (bottom diagonal brown line) with a 60ºC APST would have a Stellar Constant of about 2.35 cal/cm² min and about a 45% Cloud Cover.

Concepts Illustration: In the drawing above there is a parent star. Sunlight travels some distance (the orbital radius) to the planet and hits the upper atmosphere, this amount of energy is the planets Solar Constant. Some of the light is reflected back into space from the Cloud Cover, and some reflected from the snow, ice or sand on the surface, the average amount lost by reflection is the planet’s Albedo.

The drawing also shows an undefined land to water ratio and some percentage Cloud Cover. By choosing a planet’s mass and the APST, and plugging those values into the diagrams  found earlier in this chapter, you get the Solar Constant. This is important in determining how far the planet is away from its parent star, but more about that in a while.

Planetary Rate of Rotation
Based on observation of our own solar system, it appears that a planet’s rate of rotation is a function of its mass. The correlation between rate of rotation and mass is not perfect; however, the trend seems to indicate that it is not due to chance alone.

A reasonable theory that could explain the planet’s rotation is: During the process of planetary formation, by accretion, each particle of captured mass affects the rotational energy of the protoplanet. The net effect being an increase in the rate of rotation with an increase in mass.

Since all the planets in our solar system, except Uranus, rotate in the same direction as their orbital motion, its evident there is a tendency for incoming particles to impart a direct spin to the planet. Graphically, this may be seen as follows.

The mathematical formula expressing this relationship in hours per revolution (or more commonly ‘hours per day’)  is:

Hours / revolution = /(((2п/2MpK1)/K2)/3.6 x 10³ sec/ hr)

/ = square root
Mp = mass of the planet
R = the planet’s radius
K1 = constant, 1.46 x 10-19 cm² / sec² g
K2= constant, 0.4 (Maclauin’s spheroids)

The rate of rotation (length of day) imparted to a planet during its formation may be affected by tidal retardation. A relatively  large satellite orbiting the planet can slow the planet’s  rotation. This can be clearly seen in the Earth-Moon system. If Earth did not have the Moon in orbit, our ‘day’ would be seventeen hours, instead of twenty-four hours long.

Planets with an APST between 0ºC and 60ºC which are orbiting the relatively luminous stars of spectral class F through G, are at such a distance from their parent star that the rate of rotation is not affected. However, spectral class K stars are relatively cool stars and planets orbiting them must be in a very close orbit in order to fall with in the proper average planetary surface temperature range. Beginning with spectral class K2, the orbit for habitable temperatures is so close to the star that tidal retardation would arrest the planet’s rotation.

The habitable temperature zone around a star is called the ecosphere. We have set the ecosphere boundaries to provide the model planets an average planetary surface temperature (APST) range between 0ºC and 60ºC. The concept of ecosphere boundaries can be seen in the following diagrams.

Looking at the drawing above, we see that there are limits to the orbital diameter for a habitable planet. If the planet orbits inside the Inner boundary, the APST is above 60C and protein coagulates.; if it orbits beyond the Outer boundary, there is no liquid water.

If you will for a moment, turn back to the graph, “Determining Solar Constants’. Note that  for each planet there is given 0ºC to 60ºC temperature range. If you read from 0ºC on any planet to the Solar Constant scale on the bottom of the graph and again from 60ºC to the scale at the bottom, you will notice that these Solar Constants set the planet’s ecosphere boundaries, in terms of illumination arriving from the parent star.

By using the equation (discussed above):

L/ S = R²

Read the equation: The parent star’s Luminosity (where Š =1) [divided by] / the planet’s Solar Constant (where Ê = 1) [equals] = Radius of the planet’s orbit squared.

We can now locate a planet’s ecosphere boundaries in astronomical units.

1AU (astronomical unit) = 93 million miles

A planet whose rotation was being severely retarded might lose all of its surface water through photo-decomposition before the planet’s rotation was finally arrested. Once rotation was stopped, the planet might continue to orbit with one side always facing the parent star or it could enter a situation where one day equals a year.

Arrested planetary rotation
On planet which always present the same face to their Sun, the exposed side would be very hot and dry. If free water still existed on the planet it would have precipitated out of the atmosphere on the dark side and would exist as an ice pack. Wind circulation might follow the pattern: Cold, dry air flowing from the dark side would become hotter and hotter after it crossed the terminator (from darkness into light) to the exposed side of the planet. The vapor pressure deficit would cause rapid evaporation of any water brought to the surface by geysers, etc. As the winds move toward the center of the illuminated surface, they heat and rise higher and higher. This would in effect create a gigantic, permanent low pressure system on the illuminated side and a permanent high pressure system on the dark side.

One day equals a year 
On a planet with arrested rotation, where one day equals a year, the same type of atmospheric circulation would exist. Cool air would  cross the terminator near ground level, it would heat, rise and eventually flow back to the dark side. There is however, a major difference, the hot part of the planet and icepack would be in slow, but constant motion, around the planet as the year progressed. In this case, there would be an area associated with the moving terminator where water would exist in liquid form; however, it might do so for only a few weeks in any area.

The larger life forms we are attempting to resolve in this study, would probably not evolve on a planet whose rotation was arrested. It would be theoretically possible for such life to develop on a  arrested planet about a very cool star providing the parent star was part of a binary star system; SRAPO, however, does not directly address binary star systems.

We will then draw a general conclusion: Life as we know it will not exist on planets orbiting Main Sequence stars of spectral class K2 or lower, providing the star is isolated and not part of a binary or other complicated orbital star system.

Continued in Chapter 3: Climatic Factors

Leave a comment

Filed under SRAPO (Stellar Radii and Planetary Orbits), __Chapter 2: Average Planetary Surface Temperature

Chapter 1: Water

Our approach to the study of other worlds will be made through the media of liquid water. Water plays a multiple role in the environment and biology’s of Earth. On other planets, whose atmosphere may contain relatively large amounts of oxygen, water would almost certainly be an important raw material for organic compound synthesis.

The Source
It is believed that water is derived primarily from the crystallization of materials within the planet’s crust and is there after brought to the surface by geysers and volcanism. The ability of volcanism to release large amounts of water can be seen in the volcano Paricutin, during its most active period, it released 16,000 tons of steam a day (3,855,000 gallons of water daily). Measurements of gasses extruded from active volcanoes show a 68-70% composition of water vapor.

A reference to this process of water formation can be seen in the mineral albite (Na2.AlO3.6SiO2), a constituent of crystalline rock. At 1100ºC an pressures appropriate to 7500 feet below the planet’s surface, albite holds 4% water. As the energy from the planet’s formation is dissipated and radioactive decay diminishes the temperature begins to drop. When the subterranean temperature reaches 960ºC, crystallization begins. At 820ºC, one half of the albite has crystallized. The pressure of the newly released water build up and finally breaks through to the surface. Once in the atmosphere, it remains in its vapor state until the atmosphere is saturated at prevailing temperatures and pressure, there after condensation and precipitation begin.

Atmospheric Moisture
The evaporation of water from the planet’s surface carries off large quantities of heat received from the parent star, thus helping to maintain a heat balance.

The atmospheric water vapor traps some of the infrared radiation which has been reradiated by the planet’s surface and provides the ‘greenhouse effect’. The effect of this trapped heat has increased Earth’s average surface temperature 30º-35ºC. Were it not for the greenhouse effect, our average surface temperature would be -10ºC (14ºF) instead of the mild 20ºC (68ºF)  which it actually is.

The formation of a large cloud cover prevents further the loss of planetary heat and has the effect of depressing daytime temperatures and elevating night-time temperatures.

In the atmosphere, some of the water vapor condenses on dust particles, forming what will become rain. This process not only leads to a renewed water supply for the biotic community, but removes dust particles from the lower atmosphere.

Water and the Life Process
Water in its liquid state is the solvent and dispersion media for all protoplasmic constituents. It is only because of the presence of this chemical that the process of absorption, secretion and excretion are made possible. Carbohydrate production by chlorophyllic plants is dependent on water for the donation of a hydrogen ion in part of the photosynthetic activity.

The energy released from the foods (chemical mixtures) we eat, is largely is largely brought about by hydrolytic splitting of protein, fats and carbohydrates.

Amongst Earth’s biology’s, we find that there is a large circulation of water from the environment through the organism and back to the environment. During the life of a plant, the water lost through transpiration may be 200 to 1000 times its dry weight.
A normal human, in average environmental conditions, looses about 13 oz of water in expired air, 17 oz in urine and 20 oz  from the skin in a 24 hour period (6-1/4 cups, minimum).

In general, the larger the animal, the more water is required for its survival. Water makes up 85-95% of the fresh weight of actively growing tissue; even dormant seeds are 5-10% water by weight.

It is biologically possible, that on small, warm, arid planets and on cold planets, where liquid water is not readily available, or where long periods of drought are experienced, that the percentage of water in an organisms cells may be somewhat less than found on Earth. Perhaps other methods of water retention or conservation would be in use, for example, water loss through evaporation might be small or entirely absent and higher life forms may be biochemically capable of using metabolic water (water derived from the oxidation of hydrogen in their food). These measures could also be coupled with the consumption of relatively high moisture foods, having a low protein diet and more concentrate urine.

Water is very important in the process of life and it will be found, in varying quantities, on all planet models explored in this study.
Continued in Chapter 2: Average Planetary Surface Temperature.

Leave a comment

Filed under SRAPO (Stellar Radii and Planetary Orbits), __Chapter 1: Water

SRAPO: Introduction

[“SRAPO is the eighth Journal  of Larry Francis Pierce, being written in the year of our Lord 1985, at the forest homestead – Nightstar *”.
I began the SRAPO project during 1965, while in my first years of college. Twenty years later, in 1985, the study was reworked and entered into Journal #8, along with the associated charts, tables and my hand drawn illustrations. By the mid 1990s, SRAPO was converted into digital form; it is now being converted into the WordPress blog format.]

[Drawing, composite ‘Gray’] .

[Drawing, Eye-environments: In the paper version of this study, the page above showing the ‘alien’ head, has a circular hole cut out where the eye is seen. The eye coloration comes from the next sheet of paper (the drawing immediately above)– the centrally located blue planet, becomes the eye of the alien on the preceding page.]
.

It is the purpose of this study to explore some plausible variations in extraterrestrial planetary ecology, particularly that of intelligent life forms.

Our primary environmental building block will include carbon based life utilizing liquid water as a solvent for chemical reactions. These and other limiting factors will be discussed as they’re approached in the text.

Data regarding Earth and the other planets in our solar system have been interlinked providing a basis for this study. In some instances, I’ve extrapolated, in that it was necessary to go beyond the given information to find a set of variations. Elsewhere, the absence of data has caused me to reason out a plausible scheme for variations, amongst environmental elements.
Periodically, you’ll see where I’ve entered the Earth standard or average to intuitively demonstrate the parameter being discussed.

By the time you’ve reached the end of this study: 1) you should have a basic understanding of exobiology and general planetology, 2) you will have a new appreciation of our home planet; 3) you’ll be able to write-up a SRAPO template for a hypothetical model world environment, one that might exist around a potentially habitable star system and, 4) if you hypothesize what an alien ‘looks’ like, you can plug the given characteristics into the SRAPO template and work backwards to  find the type planet and a range of stars which it may have come from.
Keep in mind, Man could probably live, with varying degrees of difficulty, in at least one region on most of the planets covered in this study. Likewise, life in general and intelligent life in particular from these planetary models could survive, perhaps even thrive, in some of the environments found on Earth.

Table: Symbols and Terms

APST Average Planetary Surface Temperature.
Ê The symbol for Earth
Ê= 1 States that the parameter mentioned is being compared to the same condition on Earth, where the value on Earth is taken relatively, as 1.0.
Š The symbol for our  star, the Sun.
Š=1 States that the parameter mentioned is being compared to the same condition on the Sun, where the value on the Sun is taken relatively, as 1.0.
small, weak Relative terms which state that the given parameter is considered to have a smaller value than found on Earth.
moderate, average States the parameter has a somewhat similar value as found for Earth.
large, great Means the parameter has a greater value than found on Earth.

.
The ‘Various Limiting Factors illustration below, sets the basic ground rules, defining the most common conditions under which we might expect to find intelligent life.

(Continued in SRAPO Chapter 1.  Water)

1 Comment

Filed under SRAPO (Stellar Radii and Planetary Orbits), __0. SRAPO: Introduction

Exploring the SRAPO Construct

‘Exploring the Construct’ shows what can be done with SRAPO.
(SRAPO is an acronym for Stellar Radii And Planetary Orbits)

As we start, you probably realize,  that in our daily lives we take for granted the individual and combined physical effects of the Earth and the Sun on the our environment, on Earth’s habitats, and on all the life on Earth.
How the star-planet environmental descriptions were derived for this section and how you will define your own theoretical star-planet systems, will be discussed later. In the book that follows,  you’ll be introduced to charts, tables, illustrations and templates which have been included to assist in your discovery. I’ve included mathematical equations, as they were called for, however, the charts and tables have been worked out with scales, thus replacing the need for further calculations.{1}

Δ

A star-planet system’s individual or combined parameters have direct physical consequences in determining gravity,  the amount and availability of liquid water, volcanic activity, as well as affecting the atmosphere, climate, seasons, length of year, and intelligent life physiology and morphology.

In order to simplify the star and planetary data and to make learning and visualization more intuitive, I’ve made much of this study ‘relative’. Numerical parameters are usually discussed as being relative to conditions found on Earth, or relative to our Sun; in doing so, I’ve used three symbols, that you’ll encounter:  Š, Ê and AU:

1)  Š, refers to our Sun’s normal condition equaling 1. So, when, star’s  “Diameter  Š =1.3” is given, it means that the star were looking at has a diameter 1.3 times that of our Sun.

2)  Ê, similarly refers to the given condition on planet Earth as equaling 1. Hence, when a planet’s “Mass Ê = 2” is seen in the table, it means the alien planet has a mass of 2 times that of the Earth.

3)  ‘AU’ is the common abbreviation for “astronomical unit”, a distance of about ninety-three million miles, the average distance between Earth and the Sun. For comparison, this distance is taken as AU=1. When  a planet is said to be “0.8 AU” from its parent star, it is only 80% as far away as we are from our Sun, or seen another way, its 20% closer to the heat and light source than we are to ours.

Generally, if a planet is closer to a more luminous star, the planet’s average surface air temperature will be hotter than on Earth. Conversely, if the planet orbits farther from a cool, less luminous star, then it’s average surface temperature will be colder than found on Earth.

If the planet is warmer than Earth, it may not have extensively ice capped polar regions; on the other hand, a cooler planet may have larger, deeper ice caps than Earth.
A large, warmer world would seem generally more humid, while a smaller cool world would have a drier atmosphere.

Let’s take an introductory look at the power of SRAPO by briefly analyzing two dissimilar star-planet systems.
.

.
Alien Star-Planet System #1
General description: A small rocky type planet located in the outer ecosphere of large, hot star

•  This system is dominated by a very hot, blue-white star with forty percent more mass and luminosity than our Sun. The heat and light output is such that any existing habitable planet must be in an ecosphere further from the star than we are from the Sun.
•  With our hypothetical planet located 2.1 AU from the star, we  have 67% as much light falling on the top of the atmosphere. Because this is a hot star with a relatively short stable period, we may expect a more turbulent turn over in dominant life forms on the planet.
•  We will now paint a picture of a rather small, dry, cold world. This small terrestrial planet has about half the surface area and half the gravity that we’re use to. Since it has only one fourth the mass, but half the surface area, we would expect there to exist a large dry land area to water ratio. Because there is a reduced amount of light and heat at the top of the atmosphere, the planet tends to be a chilly 37ºF, more than 20ºF cooler than Earth’s average. For comparison, the alien planet is about 2-1/2 times the mass of  Mars; however, because it orbits closer to its parent star, it is considerably more habitable, than what our ‘Rovers’ have found on the ‘red planet’.
•  The cold average planetary surface temperature (APST) would have resulted in the formation of geographically large ice caps, leaving a considerable amount of the planet to exist under cool dry desert conditions.
•  The planet has less oxygen in its relatively thin atmosphere which lends to a reduced oxidation rate and larger lung capacities for the larger mobile life forms.
•  Humidity is low, especially in the areas undergoing late Fall, early Spring and the nine month-long winter.
•  Although the planet is quite cool on average, life’s development may not have been greatly impeded; as relatively clear skies would allow ultra violet rays to easily penetrate into the warmer equatorial regions for easy activation of organic molecules.
•  There would have been less volcanic activity over geologic ages (unless the planet encountered relatively frequent large asteroid and-or comet strikes) and mountain formation would tend to produce some very tall structures. Once formed, mountains would tend to persist due to low burial and erosion rates.
•  The less dense atmosphere produces smaller wind pressure at comparable wind velocities and reduces sound wave propagation.
•  This cool planet would be home to some rather bulky large animal life and a wide variety of moisture conserving plant life.
•  Animals would have developed an efficient means of generating and storing heat at a high rate.
•  A man weighing 150 pounds on Earth would weigh only 78 pounds on this planet. So, what nature withholds in terms of average surface temperature, she makes up for with a low gravity which allows the larger life forms to be bulky and probably tall.
•  Due to the thin atmosphere, the sense of smell and hearing may be reduced while food, predator and mate location may rely more on visual input.
•  The longer day and a light 20% cloud cover allows for larger day and night temperature fluctuations.
•  If we assign a 45° axial inclination to the planet (twice Earth’s tilt), we’d find a great difference in the overall seasonal energy input to each hemisphere. As it is, the planet has a year equal to three of our years, or about 1,129 days, with each season being nine months long.
•  The extended Spring and Summer seasons would favor several successive generations of ‘grasses’, followed by a long, bitter cold, dormant winter period. ‘Trees’ (meaning, their counterparts) could easily exist along flood basins and in lower latitudes. Mid latitudes would consist of grasses, cold desert vegetation which would give way to a geographically, very large tundra.
•  Massive melting in the Summer polar region would produce interesting  liquid water movement patterns and undoubtedly affect a major portion of the planet’s life forms. North-south migration across the equatorial region might be expected of tall, long limbed quadrupeds, as they moved between late Fall in one hemisphere and  Spring in the other.
•  An intelligent, tool using, upright alien, on this low gravity planet might stand and average of seven or more feet tall. Cold temperatures would favor a stocky build which provides greater internal mass for heat generation and a smaller surface area for heat loss.
• A large frame would fit in well with a large chest which would house the expanded lung  capacity needed for breathing the thinner air.
•  Also, low gravity on this cool grassy world would tend to favor tall creatures with a greater lung capacity for long distance running or migration.
•  Due to overall cool temperatures, the day and night temperature fluctuation and the  extreme season lengths, higher life forms would probably have developed warm-blooded adaptations.
•  Nearly cloudless skies and a lighter, less dense atmosphere, would allow a large amount of UV to penetrate to the surface, this damaging radiation might be blocked by the aliens having developed dark pigmentation or maintenance of a fur coat.
•  Cool average surface temperatures, the long cold brittle winters and a generally dusty environment would favor hairy-furry bodies with a long nasal passage to prewarm and  remove dust from inhaled air. These ‘people’ would probably also have a larger, more powerful heart for delivering warmed blood and a thinner oxygen supply to peripheral organs and extremities.
.

Alien Star-Planet System #2
General description: A large planet located near the inner ecosphere of star slightly hotter than the Sun.

•  This system is dominated by a hot white star with a slightly grater mass than the Sun, but with 22% greater luminosity. Under such luminosity conditions a terrestrial type planet could be somewhat closer and yet a good deal further from its Sun than we are from Sol and still fall within the habitable ecosphere boundaries. For this example, I have placed the planet 0.8 AU or 78 million miles from its parent star. The planet is therefore 20% closer to a star with 22% more luminosity that the Sun, resulting in 74% more light falling on the top of the atmosphere.
•  This relatively hot star has a slightly shorter stable period than the Sun so we might expect a bit faster turnover in dominant life forms (should we consider changes driven by stellar effects alone)
•  We will now paint a picture of a large, hot wet world with an essentially continuous cloud cover of 88%. This planet has twice the water producing mass yet only 42% more surface area than Earth, which points to a large water to land ratio.

•  Such a world might contain several Australia size continents and many strings of islands rising from submerged planetary mountain chains.
•  There is a lot more sun light arriving at the top of the atmosphere, but much of this is reflected back into space by the planets expansive cloud cover.
•  Light penetrating the clouds to reach the surface would transform into long wave heat radiation, which becomes trapped and elevates temperatures via the green house effect. Light input, plus the green house effect would create an average surface air temperature (APST) in the neighborhood of 135ºF.
•  The hot, humid atmosphere would also contain a lot of oxygen leading to an accelerated oxidation rate and the necessity of smaller lung capacities for the larger, mobile land life forms.
•  The planet’s atmospheric density would provide greater wind pressure when compared to similar wind speeds on Earth, at the same time favor sound propagation.
•  The planets larger mass would provide more volcanic activity than we are used to, but volcanic effluents dispensed into the atmosphere would precipitate out faster.
•  The increased gravity would result in smaller mountain heights, while heavy frequent precipitation would enhance the burial rate and increase erosion. Subduction and other crustal movements beneath the seas would make tidal waves more common on this planet  than on ours.
•  This wet, hot and humid world would be home to rather small, sinuous dry land animal life and a variety of succulent and tropical like vegetation.
•  Animal life would have developed efficient means of getting rid of internal heat, since the  high temperatures found across much of the planet threaten the integrity of complex organic molecules with disruption.
The fast rate of planetary rotation helps reduce the day and night temperature differences, while a continuous cloud cover helps depress day temperatures and elevate night temperatures• 

•  If we assign the planet with 0° degree of axial inclination, then there is no tilt and therefore no seasons. In place of seasons, we create thermal zones. The hottest zone being on either side of the equator with moderating temperatures found as one proceeds toward either polar region.
•  Warm blooded, intelligent life would be found more frequently in the ‘cooler’ higher latitudes.
•  Due to the higher gravity and temperatures, our hypothetical intelligent alien would stand about four feet tall with a thin frame, supported by strong bones and powerful muscles. He would carry little if any fat. •  Due to the dense atmosphere, his sense of smell and particularly hearing, would be enhanced.
•  Ear flap projections might not be necessary around the aural tract.
•  A smaller heart and thinner blood would carry oxygen to body cells and to heat dissipating organic networks.
•  His eyes might be located a bit more peripherally than ours and he may have no nasal passage projection, or ‘nose’. Air could be taken in through one or more nasal apertures.
•  Temperature and humidity would favor a hairless, smooth body.
•  Although the planets extensive cloud cover would tend to shield animal life, the occasional clear day would result in severe sunburn, for this, at least a yellow-gray level of protective pigmentation would be required by skin cells. The alien would possibly appear a mid shade color.
•  On this alien world, life could easily develop and thrive in the higher latitudes where more temperate climates  are found.
•  With the existence of islands and small continents, even a hot wet world could develop intelligent, tool using, technically advanced life forms.

Such a world might sound hot and terrible to us, but to a creature born into that world with its genetic adaptations, the planet would be as comfortable in places, as Earth is to us. This intelligent life form, would find our planet uncomfortably cold and dry. The alien might not survive for long in the searing heat of his planet’s equatorial region, but how long would we survive, isolated, in either our own polar regions, or on the Anza-Borrego Desert, without shade and water?

—————————————————

1. The calculations were done with slide rule, in a time before home computers, and at a time when expensive personal scientific calculators were just showing up in specialty retail stores-in the period that can now be thought of as ‘digital prehistory’.

Leave a comment

Filed under SRAPO (Stellar Radii and Planetary Orbits), __ Exploring the SRAPO Construct

What is SRAPO?

SRAPO¹: A Pursuit in Exobiology
Developed during the years 1965-2011, by Larry F. Pierce
[Above: The Carina  constellation]

Have you ever looked up at the myriad of stars sprinkled across the sky on a clear and beautiful warm summer night…and wondered? Did you wonder if perhaps a creature living on a planet around one of those far away lights was looking at his night sky too? …and perhaps just at the moment you were looking at his home star, he was looking across the gulf of space at our sun…and you were both wondering about one another. Did you wonder what the alien might look like? Did it ever cross your mind to wonder what he’d see when he stopped staring into the night sky, and again looked around at his own familiar surroundings? What if you could look through his eyes?

Imagine its late in the afternoon, almost dusk and you’re whisked away, then set down safely, but elsewhere on planet Earth. Without knowing your location, maybe you were set in any of these environments (see photographs below and imagine the sensations): Sahara desert; Death Valley; the Kalahari desert; the Eurasian Steppes;  US prairie; prairie-woodland;  woodlands of the eastern USA; the Pantanal Swamp; tropical Kauai, Hawaiian;  forests of central Oregon; the Tundra of northern Canada; the dry valleys of Antarctica, island chains, the shore of a continent… You’re standing there in one of those environments…its twilight, the colors have largely faded into grays. You look about, while feeling the temperature and humidity; you can  identify the general type of environment you have been set in. You can tell whether the vegetation is tall or short, thick or spindly, dense or thinly spread about, there may be sounds and smells carried in the air. Kicking at the ground you can just see whether the soil is sandy, composed of pebbles, whether its rocky, or covered by some type of  ‘organic’ matter. The things you sense and see about you are the way they are for a reason.


If you were not on Earth, but instead on a habitable planet about one of those distant stars, the things about you would still be the way they are, for a reason. Large habitable planets are generally quite wet, small ones are much drier; very hot or dry environments are likely to have water or temperature as the limiting factors for intelligent life; high relative gravity favors short and squat forms; high relative ultra violet ‘sunlight’ favors protective pigmentation; increasing planetary axial inclination favors life form mobility and hibernation…

SRAPO is a construct, a filtering lens that removes the unreasonable and focuses on the probable.

What is SRAPO?
Exploring the Construct
Book Introduction
Chapter 1: Water
Chapter 2: Average Planetary Surface Temperature
Chapter 3: Climatic factors
Chapter 4: Atmospheric Circulation
Chapter 5: Atmospheric Retention
Chapter 6: Stellar Parameters
Chapter 7: The Morphology of Intelligent Life
Chapter 8: Into A New World
Chapter 9: Data Correlation
Chapter 10: Templates
———————————-
Note 1: SRAPO is an acronym for Stellar Radii and Planetary Orbits)

Leave a comment

Filed under SRAPO (Stellar Radii and Planetary Orbits)